Description

Performance

• Nonlinear Output
• Resolution: 0.02%FS
• Bandwidth: 10 kHz
• 0-10 VDC Output
• Setpoint Switched Output

Features

• Adjustable Gain and Zero (Offset)
• Adjustable Setpoint for Go/No-Go Testing
• Range Indicating LEDs
• 12-24 VDC Power
• Probes can be ordered as vacuum compatible.

Life-Cycle Status: Active

Applications

Thread Sensing in Ferrous Materials

Specifications

Typical specifications for standard targets and probes. Actual values depend on probe, target, and calibration. Specifications assume a target area at least three times the diameter of the probe.

Resolution*: RMS at mid-range	DC-10 kHz – 0.02% of range RMS
Bandwidth	10 kHz
Linearity	Nonlinear – See Output Curves in Ranges/Probes
Temperature Drift of Probe at mid-range (15°C-65°C)	0.2% of Range/°C
Voltage Output	Analog Voltage: 0-10 V
Switch Output	Switch closure when output voltage is above adjustable setpoint: 30 VAC/60 VDC/100 mA
Input Power	12-24 VDC 2 W
Operating Temperature	4°C-50°C
Probe Operating Temperatures Standard Probes come with PUR (Polyurethane) jacketed cables. High Temperature Probes have FEP jackets. Other temperature ranges may be possible. Standard Probes: IP67 High Temperature Probes: IP63	U3 Probe	Standard Probe (PUR Cable): -25°C to +125°C (Available with optional FEP cable)High Temperature Version Not Available
	U5-18 Probes	Standard Probes: -25°C to +125°CHigh Temperature Probes: -25°C to +200°C
	U25-50 Probes	Standard Probes: -25°C to +125°CHigh Temperature Probes: -25°C to +175°C
*P-P resolution is 0.2%. In high EMI conditions (10 V/m), output level may shift and noise may rise to 600 mV RMS (6% resolution)

 

Probes and Ranges (Probe Dependent) Listed specifications assume a 3 meter probe cable; flat measurement area diameter at least 3 times larger than the probe diameter; and no customizations. Probes can be ordered as vacuum compatible; custom probesare available.

Listed specifications are for standard target materials: Nonferrous Al 6160, Ferrous 4140 Steel.

Range mm inch	Near Gap mm inch	Probe	Output Linearity Chart
0.50 0.020	0.05 0.002	U3	U3 Chart
1.25 0.050	0.25 0.010	U5	U5 Chart
2.00 0.080	0.35 0.015	U8	U8 Chart
3.50 0.140	0.60 0.025	U12	U12 Chart
5.00 0.200	0.75 0.030	U18	U18 Chart
8.00 0.320	1.25 0.050	U25	U25 Chart
12.5 0.500	1.50 0.060	U38	U38 Chart
15.0 0.600	2.00 0.080	U50	U50 Chart

 

Mechanical