REV-SA01 - Radion Electronics

page contents

REV-SA01

REV-SA01

3.5 inch SMARC specification compliant

Category: Embedded Solutions Tag: aValue

Description

Description

+

Features

3.5” SBC Form Factor

Accept Avalue and Other SMARC Compatible

CPU Modules. (82 x 50mm)

HDMI, LVDS, VGA

Audio Interface

1 x Mini-PCIe + SIM Socket

2 x CAN BUS

2 x Gigabit LAN

4 x RS-232, 3 x USB

1 x SD Socket

1 x SATA

1 x I2C RTC

On-board Accelerometer (MMA8451)

On-board Battery Charger Support 7.4V/2 Cell Li Battery

+

Spec

I/O
USB Port	2 x USB Type A 1 x USB 2.0 (1 x 5 Pitch 2.0mmHeader)
MIO	4 x 4 x RS-232 (TX/RX Only)
External I/O Connector	1 x HDMI 1 x VGA 2 x RJ45 1 x DB9 1 x Mini-USB 2 x USB Type A
Internal I/O Connector	1 x LVDS Connector (24-bit Single-channel) 1 x Backlight Connector 1 x SD Socket 1 x USB Connector 2 x CAN BUS Connector 1 x Speaker-out/Mic-in 1 x RS-232 Connector 1 x GPIO Connector 1 x RTC Battery Connector 1 x 2 Cell Li Battery Connector 1 x SATA Connector

Audio
Audio Codec	Wolfson WM8962
Audio Interface	Mic-in, Speaker-out

Certifications
Certification Information	CE FCC Class B

Mechanical & Environmental
Operating Temperature	0°C ~ 60°C (32°F ~ 140°F)
Storage Temperature	-20°C ~ 80°C (-40°F ~ 176°F)
Operating Humidity	0% ~ 90% Relative Humidity, Non-condensing
Weight	0.13kg
Power Requirement	+9V ~ 36V DC-in (REV-SA01-02-A1R) +9V ~ 24V DC-in (REV-SA01-03-A1R)
Power Mode	AT
Dimension (L x W)	146mm x 101mm (3.5” SBC Form Factor)

Ordering Information

Ordering Information

REV-SA01-03-A1R
3.5″SMARC Carrier Board full function A1

REV-SA01-02-A1R
3.5″SMARC Carrier Board (A1)

BCC-WLAN-04R
Wi-Fi 802.11a/b/g/n/ac + Bluetooth4.1 Module with PCI-e Half-Mini Card

+

Download

No.	Release Date	Model	Description	Download
1	2017-02-16	REV-SA01	REV-SA01 3rd Manual