page contents
  •    
    • Four independent optical channels
    • Supports data rates of 1 to 10.3125Gbps including: IEEE 802.3ae 10GBASE-SR/SW and 10G FibreChannel 1200-Mx-SN-I4
    • 850nm VCSEL transmitters and PIN receivers
    • IEC-60825-1 Class 1 eye safety compliant
    • Separable electrical interface with pluggable connector and screws
    • ARINC 801 industry keyed standard fiber termini interface
    • Enhanced status and diagnostics monitor interface
    • -40⁰C to +85⁰C operating temperature
    • -55⁰C to +100⁰C storage temperature
    • Parylene conformal coating option
  •    
    • Four optical channels
      • DX:  2 Transmitters, 2 Receivers
      • TX:  4 Transmitters
      • RX:  4 Receivers
    • Supports data rates up to 5 Gbps
    • 850nm VCSEL transmitters and PIN receivers
    • IEC-60825-1 Class 1 eye safety compliant
    • Typical reach of 500m on 50/125, 2000 MHz-km MMF
    • Separable electrical interface for manufacturing and service convenience
    • ARINC 801 fiber interface
    • Enhanced status and diagnostics monitor interface
    • -40⁰C to +85⁰C standard operating temperature, extended options available
    • -55⁰C to +105⁰C storage temperature
    • Parylene conformal coating option
  • Duplex transceiver module

    Supports data rates of 8Gbps to 10.3125Gbps

    Transmitter Options:
    • 1310nm wideband DFB transmitter
    • PIN Receiver
    • Transmitter compliant to IEC-60825-1, Class 1 Laser (eye safe)
    • Option for RoHS 6/6 compliant and lead free per Directive 2011/65/EU
    • Solder-down 1x12 electrical interface
    • Screw posts for securing module to host
    • SFF-8472 compliant control and diagnostics monitor interface
    • -40°C to +85°C operating temperature
    • -55°C to +100°C storage temperature
    • Parylene conformal coating option
  •      
    • Duplex transceiver module
    • Supports data rates of 8Gbps to 10.3125Gbps
    • 850nm VCSEL transmitter and PIN receiver
    • Typical reach of 82m on OM2, 300m on OM3 and 400m on OM4
    • Compliant to IEC-60825-1, Class 1 laser eye safe
    • Solder-down 1x12 electrical interface
    • Screw posts for securing module to host
    • SFF-8472 compliant control and diagnostics monitor interface
    • -40 to +85°C operating temperature
    • -50 to +100°C storage temperature
    • Parylene conformal coating option
  •      
    • 100Mb/s to 155Mb/s duplex data links
    • 1310nm LED transmitter and PIN receiver
    • Class 1 Laser Int. Safety Std. IEC-60825-1 compliant
    • Standard reach 2km on 62.5/125µm MMF
    • 1 x 10 surface mount connector standard
    • Metal LC connector receptacle with secure optical elements
    • MIL STD 883 tested and certified, MIL 810/DO-160x tested
    • -40 to +85 C operating temperature standard
    • RoHS compliant and lead free per Directive 2002/95/EC option
    • Single +3.3V power supply
    • AC-Coupled Transmitter & Receiver Data
    • Conformal coated for harsh environment use
    • Tested over the operating temperature range
  •    
    • 125 Mbps to 3.125 Gbps duplex data links
    • Compliant to 802.3z Ethernet, Fiber Channel (1x/2x/3x), Infiniband SDR, sFPDP, FCAV and ARINC818
    • 1310nm FP laser transmitter and PIN Receiver
    • Class 1 Laser Int. Safety Std. IEC-825 compliant
    • Up to 30 km on 9/125 µm SMF
    • 1x10 surface mount connector, standard
    • 1x12 surface mount connector option providing Digital Diagnostics
    • Rugged LC connector housing including screw-mounted OSAs
    • MIL-STD-883 certified
    • -40 to +85 C operating temperature
    • Option for RoHS 6/6 compliant and lead free per Directive 2002/95/EC
    • Single +3.3V power supply
    • AC-Coupled Transmitter & Receiver Data
    • Conformal coating options for harsh environment use
    • COTSWORKS RJs are fully tested over the operating temperature range
    • Pigtail Assembly option is available. Contact COTSWORKS for details
  •      
    • Compliant to ARINC 818 1.0625 Gb/s and 3.1875 Gb/s data rates
    • Dual 850nm VCSEL PIN receiver
    • Rugged LC connector housing including screw mounted OSAs
    • 1x10 connector pinout
    • MIL STD 883 certified
    • -40 to +85 C operating temperature, wider options available
    • Option for RoHS compliant and lead free per Directive 2002/95/EC
    • Single +3.3V power supply
    • RX AC-Coupled
    • Low power dissipation
    • Conformal coating for harsh environment use
  •      
    • Compliant to ARINC 818 1.0625Gb/s and 3.1875Gb/s rates
    • 850 nm VCSEL dual laser transmitter
    • Class 1 Laser Int. Safety Std. IEC-825 compliant
    • Standard reach of 500 m on 50/125 and 250 m on 62.5/125 µm MMF
    • High power VCSEL option for additional 4 dB of link budget
    • 1x10 connector option
    • Rugged LC connector housing including screw mounted OSAs
    • MIL STD 883 certified
    • -40 to +85 C operating temperature, wider options available
    • Option for RoHS compliant and lead free per Directive 2002/95/EC
    • MIL-STD-883 certified
    • -40 to +85 C operating temperature
    • Option for RoHS 6/6 compliant and lead free per Directive 2002/95/EC
    • Single +3.3V power supply
    • TX AC-Coupled
    • Low power dissipation
    • Conformal coated for harsh environment use
  •      
    • 125 Mbps to 3.125 Gbps duplex data links
    • Compliant to 802.3z Ethernet, Fiber Channel, (1x/2x/3x), InfinibandSDR, sFPDP, FCAV, and ARINC818
    • 1550nm DFB Laser transmitter and PIN Receiver
    • Class 1 Laser Inc. Safety Std. IEC-825 compliant
    • Up to 80 km on 9/125 um SMF
    • 1x10 surface mount connector standard
    • 1x12 surface mount connector option providing Digital Diagnostics
    • Rugged LC connector housing including screw mounted OSAs
    • -40 to 85 C operating temperature
    • Option for RoHS 6/6 compliant and lead free per Directive 2002/95/EC
    • Single +3.3V power supply
    • AC-Coupled Transmitter & Receiver Data
    • Conformal coating options for harsh environment use
    • COTSWORKS RJs are fully tested over the operating temperature range
  •      
    • 1Gb/s to 5 Gb/s duplex data links
    • Compliant to 802.3z Ethernet, Fibre Channel (1x/2x/4x), Infiniband, sFPDP, XAUI, FCAV and ARINC 818
    • ATEX and IECEx certified configuration available
    • 850 nm VCSEL laser transmitter and PIN receiver
    • Typical reach of 500 m on 50/125 and 250 m on 62.5/125 µm MMF
    • Duplex LC or Dual ARINC-801 connector options
    • Optional Digital Diagnostics per SFF 8472
    • MIL-STD-883 certified
    • -40 to +85°C operating temperature standard, -55 to +95°C option
    • Option for RoHS 6/6 compliant and lead free per Directive 2002/95/EC
    • Single +3.3V power supply
    • AC-Coupled Transmitter & Receiver Data
    • This part is not recommended for new designs. Use the RJ-5G-SX-C which is based on the common footprint.
  •      
      • 1 Gb/s to 5 Gb/s duplex data links
      • Compliant to 802.3z Ethernet, Fibre Channel (1x/2x/4x), Infiniband, sFPDP, XAUI, FCAV and ARINC 818
      • ATEX and IECEx certified configuration available (contact COTSWORKS)
      • 850 nm VCSEL laser transmitter and PIN receiver
      • Typical reach of 500 m on 50/125 and 250 m on 62.5/125 µm MMF
      • Duplex LC or Dual ARINC-801 connector options
      • -40 to +85°C operating temperature standard, -55 to +95°C option
      • Option for RoHS 6/6 compliant and lead free per Directive 2011/65/EU
      • Single +3.3V power supply
      • AC-Coupled Transmitter & Receiver Data
      • 1x12 Electrical Interface with Digital Diagnostics (DDMI) standard
      • Common Pin-Out configuration
      • Matches COTSWORKS RJ-10G device pin assignments
       
    • 1.25 Gbps bi-directional, single fiber transmission
    • Industry standard MSA 2x5 electrical footprint
    • Optional 2x7 electrical footprint for Digital Diagnostic support
    • Digital Diagnostics per SFF MSA SFF-8472
    • Simplex LC optical connector interface
    • Rugged through-hole mounting and optional rear ground case posts
    • Full-metal case to optimize EMI performance
    • MIL-STD-883 mechanical shock and vibration compliant
    • -40°C to +85°C operating temperature
    • EN-60825/IEC-825/CDRH Class 1 compliant 1310/1550 FP Lasers
    • +3.3V Power Supply
    • Parylene C conformal coating option
    • AC-coupled data inputs and outputs with necessary internal terminations
    • 125 Mbps to 155 Mbps bi-directional, single fiber transmission
    • Industry standard MSA 2x5 electrical footprint
    • Simplex LC optical connector interface
    • Rugged through-hole mounting posts and rear ground case posts
    • Full-metal case to optimize EMI performance
    • MIL-STD-883 mechanical shock and vibration compliant
    • -40°C to +85°C operating temperature
    • EN-60825/IEC-825/CDRH Class 1 compliant 1310/1550 Fabry-Perot Lasers
    • +3.3V Power Supply
    • Parylene C conformal coating option
    • Options for AC-coupled or DC-coupled data
    • Options for LVPECL or LVTTL signal detect
    • 1.25 Gb/s to 3.125 Gb/s duplex data links
    • 1310 nm Fabry-Perot laser transmitter and PIN receiver
    • Class 1 Laser Int. Safety Std. IEC-825 compliant
    • Standard reach of 10 km on 9/125 µm SMF
    • Industry Standard MSA 2x5 footprint
    • MSA 2x7 option available providing Digital Diagnostics per SFF 8472
    • Rugged LC connector housing including screw mounted OSAs
    • -40 to +85 C operating temperature, -40 to 95C option
    • Option for RoHS compliant and lead free per Directive 2002/95/EC
    • Single +3.3V power supply
    • AC Coupled Transmitter & Receiver Data
    • Conformal coated for harsh environment use
    • Pigtail Assembly option is available
    • Multi-Rate Compliant for FC-PI-2 Fibre Channel, ARINC 818, Infiniband, IEEE std 802.3 Ethernet
    • Certified for 3.1875 Gb/s dual channel data links
    • 850nm PIN receiver
    • Industrial temperature range standard: -40°C to +85°C
    • Extended temperature range optional: -40°C to +95°C
    • Up to 300m on 62.5/125µm MM Fiber
    • Industry standard MSA 2x5 footprint
    • Duplex LC connector
    • MIL STD 883 certified
    • Class 1 Laser Int. Safety Std. IEC-825 compliant
    • Single +3.3V Power Supply, isolated power per channel
    • Conformal coated PCB option, compliant with IPC-CC-830B, IPC-2221 and J-STD-001
  • SFF-3G-TX2
    • Multi-Rate Compliant for FC-PI-2 Fibre Channel, ARINC 818, Infiniband, IEEE std 802.3 Ethernet
    • 850nm Oxide VCSEL Lasers
    • Industrial temperature range standard: -40°C to +85°C
    • Extended temperature range optional: -40°C to +95°C
    • Up to 300m on 62.5/125µm MM Fiber
    • Industry standard MSA 2x5 footprint
    • Duplex LC connector
    • MIL STD 883 certified
    • Class 1 Laser Int. Safety Std. IEC-825 compliant
    • Single +3.3V Power Supply, isolated power per channel
    • Conformal coated PCB option, compliant with IPC-CC-830B, IPC-2221 and J-STD-001
    • 1.25 Gb/s to 4.25 Gb/s duplex data links
    • 850 nm VCSEL laser transmitter and PIN receiver
    • Class 1 Laser Int. Safety Std. IEC-825 compliant
    • Standard reach of 500 m on 50/125 and 250 m on 62.5/125 µm MMF
    • Industry Standard MSA 2x5 footprint
    • MSA 2x7 option available providing Digital Diagnostics per SFF 8472
    • Rugged LC connector housing including screw mounted OSAs
    • MIL STD 883 certified
    • -40 to +85 C operating temperature, wider options available
    • Option for RoHS compliant and lead free per Directive 2002/95/EC
    • Single +3.3V power supply
    • AC Coupled Transmitter & Receiver Data
    • Conformal coated for harsh environment use
    • Pigtail Assembly option is available

Go to Top