page contents

HybriX® Signal Distribution

///HybriX® Signal Distribution

HybriX® Signal Distribution


EMC Technology & Florida RF Labs offer low and high power RF resistors including surface mount chips, tab & cover chips, flange mounted and rod types. These resistors are available with Alumina, ALN, BeO and CVD substrate materials. Some devices use a tuned circuit design to minimize parasitic capacitance across their usable frequency bands. Most devices are available in a wide range of resistance values, typically from 1 ohm to 1 K ohms.

Choose from a variety of metallization finishes for easy mounting to a heat sink or directly to the printed circuit board.  Typical finishes include: Lead-free, RoHS compliant plating (silver or gold), solder finish with SN63 or solder fused finish with SN63 depending upon package type. Select from bulk, tape & reel, or waffle packaging, again, depending upon resistor package style.

  • Lead Free, RoHS Compliant Option Available
  • Low Capacitance
  • Mounting – Surface Mount, Tab & Cover, Flange, and Rod
  • Power Levels: 0.05 to 800 Watts
  • 50 and 100 Ohms Standard
  • Tight Resistance Tolerance – +/-5%, +/-2%, and +/-1% Available
  • Tuned Circuit
  • Available in AlN, BeO, or Alumina
  • Substrate Thicknesses of .015″ to .120″ Available
  • Rod Diameters of .020″ to .375″
  • Custom Tab Forming Available
  • Resistance Ranges from 3 to 400 Ohms
  • Small Footprint and Low Profile



  • Base Stations
  • Broadcast (TV amd Radio)
  • High Power Amplifier
  • Instrumentation
  • Military
  • Radar System
  • Satellite Communications
  • Splitters/Combiners
  • Voltage Dropping Resistor
  • Wilinson Dividers