page contents

TMP190 Temperature Sensor

///TMP190 Temperature Sensor

TMP190 Temperature Sensor

  • Up to Seven Temperature Sensors
  • Index Pulse Input
  • Rotary Encoder Input:
    Differential or Single-Ended
  • Index/Encoder Activity Indicators
  • Computer Controlled

The TMP190 is used primarily with the Lion Precision Spindle Error Analyzer. In this application it monitors temperature in various locations of a machine tool while the spindle is tested for error motions. Inputs for encoder pulses and index pulses are processed on board and used by a computer to synchronize readings to specific angular locations.

All Eurocard modules are enclosed in 1, 2, 3, 6, or 8 channel systems, depending on number of measurement channels and support modules ordered.

Life-Cycle Status: Active

Specifications

Accuracy*: ±1.8°F@40°F – 180°F
±1.0°C@4°C – 82°C
Output Voltage ±10VDC
Measuring Range: 40°F-180°F

4°C-82°C

Sensor Interchangeability Error ±0.2°F
±0.1°C

*In high EMI environments (10 V/m) temperature measurement may shift as much as 4°C.

Magnetic Mount Temperature Sensor

temperature sensor

Description

  • Bright Display of Dimensional Units
  • Inch or MM Display Selection
  • Two-Channel Signal Summing
  • Peak Capture Functions
    – Maximum
    – Minimum
    – TIR
    – Tracking TIR
  • Processed Signal Voltage Output

All Eurocard modules are enclosed in 1, 2, 3, 6, or 8 channel systems, depending on number of measurement channels and support modules ordered.

Life-Cycle Status: Active

Specifications

BNC Output Scaling Error: -3.0%
Internal Scaling Error: 0.2%
Difference Error: 0.2%
Summing Error: 0.2%
Tracking TIR Error Relative to Frequency:
(not recommended below 100Hz)
10 Hz: -15.0%

100 Hz: ±0.3%

1 kHz: ±1.5%

5 kHz: ±4.0%

TIR Error Relative to Input Frequency: DC: -15.0%

1 kHz: ±1.3%

5 kHz: ±4.0%

Peak Droop: 1 mV/15 seconds
BNC Output Impedance 150 Ohms